Raritan has launched a line of data centre power distribution units (PDU) that allow monitoring temperature and humidity within equipment racks, a feature the company says is unique in the market.
“There are others out there that do it generally,” said Jerry Diakow, country sales manager for Raritan Canada, “but nobody’s doing it at the rack level.”
“The ability to start monitoring temperature inside the rack and get a much more granular look at just how hot different parts of your enterprise are,” is new to Raritan’s Dominion PX line, said Nik Simpson, senior analyst with The Burton Group.
“At the moment, Raritan is the only one I’ve heard of doing this,” he said. “I suspect they won’t be the last. I suspect you’ll also see this sort of technology being integrated directly into racks. What we’re going to need is some sort of standard interface for monitoring and collecting the information.”
Temperature monitoring in the typical data centre isn’t much more sophisticated than it is in your house, Simpson said. “It’ll tell you that the whole house is at roughly 75 degrees, but that might mean the upstairs room is at 95 and the downstairs is like a meat locker.”
Because they don’t know where the heat is coming from, enterprises tend to err on the side of colder, Simpson said. “If you go into an enterprise data centre at the moment, most of them, you’ll find you need a long-sleeved shirt at the very least,” he said. “And it sounds like a jumbo jet on the taxiway, basically because if you don’t know enough about where the heat is, you have to cool everything as much as you can, just to make sure the hot spots don’t get too hot.
More power-saving tips from IT World Canada
“Bringing that temperature monitoring down much closer to the rack and giving a much more granular picture of where things are hot and where things are cold will allow you to target your cooling solutions much more effectively and probably raise the overall temperature of your data centre without impacting any hardware adversely.”
Dynamically changing the cooling – responding to temperature increases that vary according to the use of the rack equipment – also saves power, by applying cooling only when necessary, said Simpson.
“You might have an area that gets particularly heavily used in terms of application usage or storage or something at a particular time of the day, and during that time in the day it gets a lot warmer than it is in normal conditions,” Simpson said. “If you know that and you can see that trend happening, then you can start to cool it just while it’s building up, pushing out a lot of heat. You can then reduce the cooling around it during other times during the day.”
Watch this: Sustainable IT